For your convenience, you can either watch the installation video below or follow the detailed step-by-step written instructions beneath the video. Both options will guide you through the process to ensure a smooth installation of your BlindMaster.
5 Minutes Installation
What's in the box?
Everything you need for the installation is provided in the box—no extra tools or materials are required.
Three steps to assemble BlindMaster
1. Unpack all parts: Lay out the upper frame, lower frame, and side frames on a clean, flat surface.
2. Position the Upper and Lower Frames: Place the upper and lower frames parallel to each other on a horizontal surface.
Attach one frame connector onto one end of the frame with the fabric, then attach the other connector onto the other end.
Connect all of the frames together by connecting the fabric and the side frame with the upper and lower frames.
Four steps to install BlindMaster
Split the provided foam tape into two equal parts.
Peel off the protective backing from the foam tape to expose the sticky side.
Peel off the protective backing from the foam tape to expose the sticky side.
Place the blinds inside of your window recess. Test the blinds by pulling the fabric frame to the left.
FAQs
BlindMaster features a unique track system that eliminates gaps between the blinds and the window frame to ensure total darkness. The dual-layered honeycomb fabric combines non-woven polyester with a reflective thermal barrier to block light, insulate against heat, and reduce noise.
BlindMaster is designed to fit most standard window types, but there are a few considerations.
Guard won't fit windows that are not square. Additionally, the blinds require at least 3 centimeters of unobstructed recess space for proper installation. If your window doesn't meet these criteria, Guard may not be suitable for you.
Here's a list of compatible and incompatible window types to help you determine if our product is the right fit for your home:
European Windows
Tilt-and-Turn Windows
Fixed Windows
Sliding Windows
Casement Windows
Hung Windows
Sash Windows
Bay Windows
Awning Windows
Skylights
Arched windows
To ensure correct measurements, please read our Measuring Guide.It's important that your measurements are accurate and precise, as they are crucial for the blinds to fit properly. Incorrect measurements will result in the blinds not fitting your windows.
The interior of the BlindMaster matches your fabric choice, while the exterior is always Quartz to reflect light. If you select Graphite, the interior side will be Graphite, but the exterior will remain Quartz. This design ensures a uniform appearance from the outside and is intended to reflect light.
To install BlindMaster, follow our step-by-step instructions in our Installation Guide.
Just reach out and they'll take it from there!